Language: English | Deutsch | 中国的       Change Country
Silicon Labs

Automotive and Industrial Microcontrollers » C8051F507-IM

B
U
Y
Order Number Distributor Stock    
C8051F507-IM Arrow Electronics 48 BUY NOW QUOTE
 
Analog Peripherals
12-Bit ADC
  • ±1 LSB INL (C8051F52x/C8051F53x); no missing codes
  • Programmable throughput up to 200 ksps
  • Up to 6/16 external inputs
  • Data dependent windowed interrupt generator
  • Built-in temperature sensor
Comparator
  • Programmable hysteresis and response time
  • Configurable as wake-up or reset source
  • Low current
POR/Brownout Detector
Voltage Reference—1.5 to 2.2 V (programmable)

On-Chip Debug
  • On-chip debug circuitry facilitates full-speed, non-intrusive in-system debug (No emulator required)
  • Provides breakpoints, single stepping
  • Inspect/modify memory and registers
  • Complete development kit
Supply Voltage 2.7 to 5.25 V
  • Built-in LDO regulator
High Speed 8051 μC Core
  • Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
  • Up to 25 MIPS throughput with
  • 25 MHz system clock
  • Expanded interrupt handler
Memory
  • 8/4/2 kB Flash; In-system byte programmable in 512 byte sectors
  • 256 bytes internal data RAM
Digital Peripherals
  • 16/6 port I/O; push-pull or open-drain, 5 V tolerant
  • Hardware SPI™, and UART serial port
  • Hardware LIN (both master and slave, compatible with V1.3 and V2.0)
  • Three general purpose 16-bit counter/timers
  • Programmable 16-bit counter/timer array with three capture/compare modules, WDT
Clock Sources
  • Internal oscillators: 24.5 MHz ±0.5% accuracy supports
  • UART and LIN-Master operation
  • External oscillator: Crystal, RC, C, or Clock (1 or 2 pin modes)
  • Can switch between clock sources on-the-fly
Packages:
  • 10-Pin QFN (3 x 3 mm)
  • 20-pin QFN (4 x 4 mm)
  • 20-pin TSSOP
Temperature Range: –40 to +125 °C

Data Sheet

C8051F50x/F51x